Timelapse Photography: “Holy Grail” Method Versus Aperture Priority

(This article is a supporting part of our ongoing testing of low-light camera metering reliability)


One of the most challenging genres of modern digital photography is nightscape photography, and one of the most difficult ways to capture this subject is with a day-to-night (or night-to-day) timelapse.

As an example, from bright sunlight to a moonless, starry night, a camera’s exposure will need to change by a whopping TWENTY stops or so.

Simply put, no camera can capture that range without adjustment, and this is unlikely to change. And, no matter what, the best image quality will always come from a correct exposure. Therefore, it becomes necessary to adjust your exposure during any timelapse in which the light changes significantly.

Before we continue, let’s make one thing clear: for most nightscape (also known as landscape-astrophotography or astro-landscape) photographers, if you are only capturing still images of a scene then you will do well to only ever use manual exposure, and to completely ignore your camera’s light meter. Instead, your histogram alone should be trusted.

How To Adjust Your Exposure During A Timelapse

There are multiple ways to tackle these challenging conditions, such as sitting by your camera for two hours, carefully checking and adjusting the exposure every minute, and then attempting to correct the stepped” exposure brightness in post-production.

Or, you could try letting your camera meter do its job, and hope that it knows how to correctly meter a night sky and not just give you pure black photos.

The Holy Grail Timelapse Method

The “Holy Grail Method” of timelapse photography is, in a nutshell, sitting next to your camera and manually adjusting the exposure. Between every single shot, you check your histogram, and bump up (or down) the exposure by 1/3 of a stop if it’s needed.

If you’re doing a full day-to-night timelapse and you’re going from bright daylight to a moonless, starry sky, that means you could be adjusting your exposure (and bumping your camera’s pointing?) 60 different times!

Unless your tripod is a boat anchor and you have a very gentle touch, this is very likely to create highly visible shaking in your final timelapse. You can try using a Bluetooth/WiFi-paired cell phone (most camera brands’ mobile apps allow you to control your camera’s exposure), but you’ll still create a very noticeable brightness “jitter” that has to be corrected very carefully in post-production with specialized software. (See the video above for a full demonstration!)

NOTE: the above video was made using a Nikon D800, which failed to meter correctly almost immediately after sunset, which is why back then I was still a fan of the Holy Grail Method. In our standardized test, the D800E fails to meter at about EV0, which is one of our worst scores.

Today, however, many cameras (especially mirrorless cameras that use their main image sensor for metering) can meter well below EV0. Depending on the ambient light of your nightscape, (moonlight, nearby light pollution, or Low-Level Landscape Lighting), you might be able to get…

The Benefits Of Aperture Priority (And Auto-ISO) For A Day-To-Night Timelapse

First and foremost, if you use Aperture Priority and auto ISO, you won’t have to touch your camera nearly as much. You might have to dial in some positive exposure compensation right after sunset or just before sunrise, but that’s about it.

Second, there is an added bonus that many people don’t realize! More and more (though not all) cameras have an additional perk of auto-ISO: they actually use extremely small exposure increments, much smaller than 1/3 stop, resulting in a perfectly smooth transition from day to night.

Nikon’s latest cameras (D850 and newer) have a built-in interval timer which is capable of exposure smoothing, and it works very well! Sony, Canon, and other cameras may or may not have this feature; the best way is to just go out and test your particular camera!

Speaking of testing: in the past, there has been a fundamental problem with this timelapse method: many cameras’ light meters would just completely fail and you would get a timelapse that rapidly transitioned to nothing but black frames.

HOWEVER, lately, more camera have been able to meter very well in extremely dim light, such as the light of a full or even crescent moon, and a select few cameras, shockingly, can meter a pitch-dark, moonless starry night sky with impressive accuracy.

That is why we created THIS TEST CHART, so that you can know what types of lighting conditions you can trust your specific camera to give a good exposure in.

Conclusion | The Best Day-To-Night Timelapse Transition Method

The combination of not having to touch your camera dozens of times during blue hour and having quite smooth output makes the second choice seem very tempting: use the “Holy Grail Method” if you must; however, you could get perfectly smooth exposure transitions by using auto ISO and Aperture Priority, thus saving significant work in post-production and likely producing a higher quality final result.


Integrating Sphere & Camera Metering Test Project

Main Project Page – Test Results

Project Overview – What Is An Integrating Sphere, and How We Used One to Measure Cameras’ Low-Light Metering Capability

Frequently Asked Questions / FAQ

What are EVs, and What do They Mean for Different Cameras? (Non-Technical Explanation)

The Technical Explanation of EVs, and Calibration of the Integrating Sphere

So, How Did You Build an Integrating Sphere, Anyway?

Timelapse Methods Compared: Aperture Priority VS Holy Grail Method

(YOU ARE HERE)


 

Astro-Landscape & Long Exposure Timelapse Testing For Mirrorless Cameras: External Battery Power

Since acquiring one of the most amazing compact super-zoom digital cameras ever, the Sony RX10 mk2, I have been earnestly testing Sony’s USB power input. All of of the newer (mk2) A7-series mirrorless full-frame bodies, for example, can run off a 5V power bank using a USB cable. (Previously, the Sony USB port could only charge a battery while the camera was off, apparently.)

My goal is to see just how ready (if at all) mirrorless cameras are for all-night astro-landscape timelapse shooting.

Continue reading

Radian 2 Kickstarter Campaign Almost Over

There are fewer and fewer things that I get very excited about these days, as far as photography equipment goes. We’re pretty close to having the “ultimate” camera bodies, the “ultimate” lenses, and amazing other tools for the astro-landscape work that I am passionate about.  I could use cameras and gear from this current generation for the rest of my life, and be quite happy. Continue reading

Alpine Labs Radian – Timelapse Device Quick Intro

I’m always on a quest for ultra-lightweight, simple, and affordable equipment.

That’s one of the main reasons why, despite owning two full-frame cameras and a handful of lenses, I still frequently reach for my crop-sensor Nikon D5300 and Tokina 11-16mm for creating both still images and timelapse footage.

I obsess over weight for reasons other than just being a sissy, by the way.  (Although that may be one of the reasons.) I obsess over weight because the lighter the gear, the easier it is to bring two or three cameras into the wilderness! (Watch this video if you haven’t already)

I obsess over price for reasons other than just being cheap-o, too.  (Although, again, that could be one of the reasons…) Mostly, I like affordable gear because it makes me a little more willing to take a risk I might not be willing to take if $5,000 is at stake.  (Either by destruction, theft, or confiscation by authorities…  ;-) Continue reading